Bench Lathe

Features This machine tool can assume all kinds of turning works, it can turnings many kinds of the metric threads, the inch threads, the modutus pitches, the diametrical pitches which are in commen use, and it can bore, heaming, scraping oilcan. This tool is used of high intensity of cast iron, the surface of guideway has been quenched with high frequency, then it has been elaborate milling. It has high precision and long life. The gears of the headstock have been quenched with high frequency and elaborate milling, theyhave high precision and low noises. Main specifications Model C0632Ax750 C0632Ax1000 C0636Ax750 C0636Ax1000 Swing over bed 330mm 360mm Swing over cross slide 198mm 212mm Swing in gap diameter 476mm 491mm Swing in length 210mm 210mm Center height 166mm 166mm Admits between 750mm 1000mm 750mm 1000mm Bed width 187mm 187mm Bed length 1248mm 1655mm 1363mm 1655mm Bed height 290mm 290mm Spindle bore 38mm 38mm Spindle nose D1-4 or A2-4 D1-4 or A2-4 Taper in nose No. 5 morse No. 5 morse Taper in sleeve No. 3 morse No. 3 morse Speeds number 8 or 16 (pole changeable motor) (optional) 8 or 16 (pole changeable motor) (optional) Speeds range 70-2000rpm or 35-2000rpm (2 speed motor) 70-2000rpm or 35-2000rpm (2 speed motor) Cross slide width 118mm 118mm Cross slide travel 160mm 118mm Compound rest width 76mm 76mm Compound rest travel 68mm 68mm Lead screw diameter 22mm 22mm Lead screw thread 8 TPI or 3 mm pitch 8 TPI or 3 mm pitch Feed rod diameter 19mm 19mm Cutting tool max section 16x16mm 16x16mm Threads imperial pitches 36 Nos. 8-112 TPI or (34 Nos. 456 TPI) 36 Nos. 8-112 TPI or (34 Nos. 456 TPI) Threads metric pitches 28 Nos. 0.2-5mm pitch or (26 Nos. 0.4-7mm pitch) 28 Nos. 0.2-5mm pitch or (26 Nos. 0.4-7mm pitch) Threads diametral pitches 36 Nos. 8-112 D.P 36 Nos. 8-112 D.P Threads module pitches 22 Nos. 0.2-3 M.P. 22 Nos. 0.2-3 M.P. Longitudinal feeds imperial 36 Nos.0.00190.0273/Rev. or (32 Nos. 0.0020.548/Rev) 36 Nos.0.00190.0273/Rev. or (32 Nos. 0.0020.548/Rev) Longitudinal feeds metric 36 Nos.0.0500.696mm/Rev. or (32 Nos. 0.0521.392mm/Rev) 36 Nos.0.0500.696mm/Rev. or (32 Nos. 0.0521.392mm/Rev) Cross feeds imperial 36 Nos.0.00060.0094/Rev. or (32 Nos. 0.00070.0187/Rev) 36 Nos.0.00060.0094/Rev. or (32 Nos. 0.00070.0187/Rev) Cross feeds metric 36 Nos.0.0130.188mm/Rev. or (32 Nos. 0.0140.380mm/Rev) 36 Nos.0.0130.188mm/Rev. or (32 Nos. 0.0140.380mm/Rev) Quill diameter or optional 32mm 32mm Quill travel or optional 100mm 100mm Quill taper or optional No. 3 morse No. 3 morse Set over 10mm 10mm For main motor 2HP, 3PH or 2HP, 1PH 2HP, 3PH or 2HP, 1PH